Liquid Penetrant Testing Chemicals

Liquid penetrant inspection is ideal for detecting fine surface open defects. NDT Inspectors requires consistent product quality to find very fine defects with best confidence level. Eishin Kagaku Pentrant chemicals providing repeatable and reproduceable results .

Click the butons below to find out more about Eishin Kagaku’s full range of penetrant testing products including penetrants, developers and emulsifiers. Our products are listed in QPL SAE AMS 2644 Qualified Product List products and met most of the industrial standards like ASTM E1417, ASTM E165, ISO 3452 etc,. Our products are approved by major aero OEM-MRO.


Water Washable Fluorescent Penetrants (Aerospace)

[product_category category=”water-washable-fluorescent-penetrants-aerospace” per_page=”12″ columns=”4″ orderby=”default” order=”ASC” operator=”IN”]

Water Washable Fluorescent Penetrants (General)

[product_category category=”water-washable-fluorescent-penetrants-general” per_page=”12″ columns=”5″ orderby=”default” order=”ASC” operator=”IN”]

Post Emulsifiable Fluorescent Penetrants

[product_category category=”post-emulsifiable-fluorescent-penetrants/” per_page=”12″ columns=”4″ orderby=”default” order=”ASC” operator=”IN”]

Emulsifiers / Removers

[product_category category=”emulsifiers-removers” per_page=”12″ columns=”4″ orderby=”default” order=”ASC” operator=”IN”]

Developers

[product_category category=”developers” per_page=”12″ columns=”4″ orderby=”default” order=”ASC” operator=”IN”]

Test Panels

Hoffmann TAM Panel

HOFFMANN TAM PANEL 1

Hoffmann TAM Panel with transparent box.
In foam milled stacker trough, for the Panel deposit.

Learn More

HOFFMANN TAM PANEL 2

Hoffmann TAM Panel with transparent box.
In foam milled stacker trough, for the panel deposit.

Learn More

HOFFMANN TAM PANEL 3

Hoffmann TAM Panel with transparent box.
In foam milled stacker trough, for the panel deposit.

Learn More

HOFFMANN SPECIAL PT PANEL

Hoffmann HS-10-Panel with 10 Micrometer crack depth
Hoffmann HS-20-Panel with 20 Micrometer crack depth

Learn More

PSM-5 TEST PANEL (TAM PANEL)

Sherwin Incorporated are one of two Pratt and Whitney approved manufacturers of the “Penetrant System Monitoring Panel”

Learn More

SHERWIN TWIN KDS PANELS

A pair of nearly identical panels measuring 2 x 6 inches and 0.090 inch thick with matching crack patterns.

Learn More

WTP-1 Panel

SHERWIN WASH TEST PANEL

The 1.5 x 2 inch panels are made from 16 gauge 301 or 302 stainless steel by grit blasting with 80 mesh aluminum oxide grit and 60 psi of air pressure.

Learn More

SENSITIVITY

TWIN NI-CR SENSITIVITY PANELS

A set of two panels, each measuring 3.875 x 1.875 inches (100 x 35mm), sheared from the same stock with matching crack patterns.

Learn More

WTP-1 Panel

SHERWIN WASH TEST PANEL

The 1.5 x 2 inch panels are made from 16 gauge 301 or 302 stainless steel by grit blasting with 80 mesh aluminum oxide grit and 60 psi of air pressure.

Learn More

PANEL

TYPE 2 PANEL

Having two functions , crack and roughness
Material : Stainless Steel with Ni-Cr coating

Learn More

CRACKED ALUMINUM BLOCKS

CRACKED ALUMINUM BLOCKS

Pressure code, section V & III, MIL-I-25135 and AMS-2644. The cracked aluminum block is made from SB-211 Type 2024 aluminum, rolled 3/8 inch thick with dimensions of 2 x 3 inches.

Learn More